vectra cd70 navigatie werkt niet

Forumindex Forums Modellen Vectra, Signum vectra cd70 navigatie werkt niet

9 berichten aan het bekijken - 1 tot 9 (van in totaal 9)
  • Auteur
    Berichten
  • #17269496
    jsp
    Deelnemer

    goedeavond heren,

    Ik ben in het bezit van een Opel Vectra C GTS 2007 1.8 maar, de navigatie heeft het opgegeven laatste week door een slechte accu.

    Nu blijft mijn navigatie op ”bezig met initaliseren” en gps doorgekruist :wtf .

    Dealer zegt alleen nieuwe unit vervangen :wtf .

    Kan de gps antenne kapot zijn of iets anders?

    Zover wat er geprobeerd is:

    – Akku kabels losmaken overnacht (2x)
    – zekering van de navigatie eruit gehaald
    – oude cd weer erin gezet maar blijft haken.

    #18264125
    liviu2004
    Deelnemer

    I have seen that before on english forums, but no final solution. My opinion is that navi module is damaged and needs replacing.

    #18264126
    jsp
    Deelnemer

    @liviu2004 wrote:

    I have seen that before on english forums, but no final solution. My opinion is that navi module is damaged and needs replacing.

    :sleeping GPS Sensor issue?

    #18264127
    liviu2004
    Deelnemer

    Not sure, should pass initializing part. If you have opcom, connect it to cd70 and check for error codes.

    #18264128
    jsp
    Deelnemer

    I will try find my opcom tonight and try to diagnose.

    #18264129
    jsp
    Deelnemer

    Laser gone?

    #18264130
    liviu2004
    Deelnemer

    Could be, too bad the cd70 service manual is not public (some have it). Anyway, the drive units are interchangeable, if you change between them, at least you will see if GPS will work. If you are not sure how to do it, come to me and I will show you.

    I can source spare parts for you if you want.

    #18264131
    jsp
    Deelnemer

    @liviu2004 wrote:

    Could be, too bad the cd70 service manual is not public (some have it). Anyway, the drive units are interchangeable, if you change between them, at least you will see if GPS will work. If you are not sure how to do it, come to me and I will show you.

    I can source spare parts for you if you want.

    If you have an updated unit pm me.

    #18264132
    liviu2004
    Deelnemer

    PM sent.

9 berichten aan het bekijken - 1 tot 9 (van in totaal 9)
  • Je moet ingelogd zijn om een antwoord op dit onderwerp te kunnen geven.